2 Most Common Suspension Problems

You would easily blame the suspension lift kit on your vehicle for practically all the problems that it might have. Your dad advised you against it but you went ahead with it anyway. Now all you can do is regret your decision. Is that how you are thinking right now?

Well, don’t because your Nissan Navara D40 3 Inch Lift Kit is not the reason why your car is causing so many problems in your life. It is all due to lack of maintenance and attention that these kits demand. And when we fail on giving them what they want, they falter.

Some prominent changes that you will notice after installing a quality suspension lift kit in your car:

• It is the Holden Colorado RG Lift Kit that you installed in the suspension of your car that gives it the ability to drive over any kind of road and terrain.
• It gives you maximum comfort while driving.
• It is your suspension lift kit that lets you conquer the most extreme terrains while your tires grip the ground firmly.
• You can safely carry any amount of load with your car and still navigate a wild and twisty road.
• After you have installed a quality suspension lift kit no matter how often your car faces shocks and excessive vibrations it will maintain its balance everywhere.

Trouble With Your Suspension

It is very essential that you remember to always keep on inspecting your suspension periodically. You also need to re-torque, and repetitively grease the suspension components after every time you’ve taken the car for an outing. Proper maintenance is the biggest challenge that most of us face and the primary key to prolonging your suspension’s life and durability.

But there are times when your suspension encounters problems that are very difficult to overcome and in many cases even life threatening. In such situations you find yourself wondering what if you had gotten an instant automobile check at the garage that you had gone to last week with your brother. 

They could have easily conducted a fast diagnosis of the suspension and found out if it was facing any problems. This is very important to do because the moment you think of installing a product such as a brand new Holden Colorado RG Lift Kit in your car, these issues sprout up and can be really frustrating. Needless to mention more often than not they turn out to be expensive and time-consuming to rectify.

When it comes to maintaining your suspension it doesn’t really matter whether you have an old and worn out ride or a brand new SUV that you bought after so many personal budget cuts, no vehicle on the road is immune from the problems of the suspension.

You can’t possibly rush to your nearest mechanic to understand the problems that your rig might be facing. So, here are 2 major problems that you could face with your suspension and the way to solve them on your own. 

Bending of the Shock Shaft and ways to mend it 

• Your suspension system comprises shock shafts which are an essential part of it. They do the job of the damping the movement of the wheel before it reaches the vehicle and many of us know it as a “piston rod”.
• Bent shock shafts are not an uncommon occurrence, but when you see something like this bent to a large extent it means the suspension has taken a serious load over it.
• This problem mostly results in a loss of shock travel and it may also but not always cause a leaking seal.
• You may also experience a stiff ride depending upon the severity of the bend.
• The most common reason for a shaft to bend would be when it hits against an object.
•  Often improper suspension geometry can render it that way as well.
• They may also bend when the mounting isn’t done properly or there is excessive misalignment or over-articulation.
• You can replace the shock or if you choose to rebuild them, most racing-style shocks can be restored to their earlier condition.

Ball Joints Gone Bad And Ways To Overcome It

• As you know that a ball joint is spherical in shape and does the job of connecting the steering knuckle to the axle or control arm.
• They also act as the point of pivot between the suspension and the wheels and let you turn the steering knuckle by the tie rod very smoothly and without binding.
• When you are modifying your car or installing a product such as the Holden Colorado RG Lift Kit to use larger tires, stock ball joints should be avoided.
• They weaken your suspension.
• What you need in their place are heavy duty and solid ball joints.
• They should be serviceable and should be able to bear heavy usage.

Do You Know How To Recognize If The Ball Joints In Your Car Have Gone Bad?

• They could be wandering and/or clunking as we speak and in some severe cases, they might fail completely and cause the steering knuckle and a control arm to separate. This could make the driver lose control and crash.
• You should know that ball joints are available in both serviceable and non-serviceable variants. Non- serviceable ball joints can be a real issue because they cannot be repaired or lubricated again and again as the serviceable ball joints. They will begin to dry out and will eventually rust once their seal breaks.
• From that point on it is only a matter of time until they will completely fail. One more thing that can cause the ball joint to fail is the use of larger wheels and tires.
• Increased wheel backspacing and overextension of the suspension are also prominent causes.
• You can always invest in Heavier-duty replacement ball joints to rectify this problem. They are readily available in the market.
• Choosing a high-angle version will suit you if you own an IFS rig.